Cisco nexus 5000 series Cli Configuration Manual page 307

Chapter 1 Using Cisco Fabric Services
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
the network are shown under the local network. In case of a merge failure or a merge in progress, the
local network and the remote network involved in the merge are indicated separately. The application
server in each network that is mainly responsible for the merge is indicated by the term Merge Master.
switch# show cfs merge status name port-security
Logical [VSAN 1] Merge Status: Failed
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
238
Remote Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
236
Logical [VSAN 2] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
211
1
Logical [VSAN 3] Merge Status: Success
Local Fabric
----------------------------------------------------------------
Domain Switch WWN
----------------------------------------------------------------
221
103
The following example of the show cfs merge status name command output displays an application
using the physical scope with a merge failure. The command uses the specified application name to
display the merge status based on the application scope.
switch# show cfs merge status name ntp
Physical
Local Fabric
---------------------------------------------------------
Switch WWN
---------------------------------------------------------
20:00:00:05:30:00:6b:9e
Remote Fabric
---------------------------------------------------------
Switch WWN
---------------------------------------------------------
20:00:00:0e:d7:00:3c:9e
The show cfs peers command output displays all the switches in the physical network in terms of the
switch WWN and the IP address. The local switch is indicated as Local.
switch# show cfs peers
Physical Fabric
-------------------------------------------------
Switch WWN
-------------------------------------------------
20:00:00:05:30:00:6b:9e
OL-16597-01
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
20:00:00:05:30:00:6b:9e
20:00:00:0e:d7:00:3c:9e
Merge Status: Failed
IP Address
10.76.100.167
IP Address
10.76.100.169
IP Address
10.76.100.167
IP Address
10.76.100.167 [Merge Master]
IP Address
10.76.100.169 [Merge Master]
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
IP Address
10.76.100.167 [Merge Master]
10.76.100.169
[Merge Master]
[Merge Master]
[Local]
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
Displaying CFS Distribution Information
1-15