Displaying Fcs Information - Cisco nexus 5000 series Cli Configuration Manual

Displaying FCS Information

S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Displaying FCS Information
You can use the show fcs commands to display the status of the WWN configuration.
The following example shows how to display the FCS local database:
switch# show fcs database
The following example shows how to display a list of all interconnect elements for VSAN 1:
switch# show fcs ie vsan 1
The following example shows how to display information for a specific platform:
switch# show fcs platform name SamplePlatform vsan 1
The following example shows how to display port information for a specific pWWN:
switch# show fcs port pwwn 20:51:00:05:30:00:16:de vsan 24
Default Settings
Table 1-1
Table 1-1
Parameters
Global checking of the platform name
Platform node type
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-4
lists the default FCS settings.
Default FCS Settings
Chapter 1 Configuring Fabric Configuration Servers
Default
Disabled
Unknown
OL-16597-01