Cisco nexus 5000 series Cli Configuration Manual page 42

Using Commands
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
switch(config)# do terminal session-timeout 0
switch(config)#
In this example, terminal session-timeout is an EXEC mode command. You are entering an EXEC
mode command using the configuration mode do command.
The do command applies to all EXEC mode commands other than the end and exit commands. You can
also use the help (?) and command completion (Tab) features for EXEC commands when entering a do
command along with the EXEC command.
Table 1-2
Table 1-2
Command
Ctrl-P
Ctrl-N
Ctrl-X-H
Alt-P
Alt-N
Ctrl-G
Ctrl-Z
Ctrl-L
Table 1-3
Table 1-3
Submode Name
Call home
FCS Registration
Fibre Channel alias
FSPF
Interface
configuration
Line console
Virtual terminal line
Role
VLAN
VSAN database
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-8
lists some useful command keys that can be used in both EXEC and configuration modes.
Useful Command Keys
Description
Up history
Down history
List history
History search backwards
Note The difference between Tab completion and Alt-P or Alt-N is that
pressing Tab completes the current word, while Alt-P and Alt-N
completes a previously entered command.
History search forwards
Exit
End
Clear session
describes the commonly used configuration submodes.
Common Configuration Submodes
From Configuration Mode, Enter:
callhome
fcs register
From FCS registration submode:
platform name name vsan
vsan-id
fcalias name name vsan vsan-id
fspf config vsan vsan-id
interface type slot/port
line console
line vty
role name
vlan
vsan database
Chapter 1 Using the Command-Line Interface
Submode Prompt
switch(config-callhome)#
switch(config-fcs-register)#
switch(config-fcs-register-attrib)#
switch(congif-fcalias)#
switch(config-(fspf-config))#
switch(config-if)#
switch(config-console)
switch(config-line)#
switch(config-role)#
switch(config-vlan)#
switch(config-vsan-db)#
OL-16597-01