Group Settings; Table 98: Group Settings; Figure 186: Announcements Center Group Configuration - Grandstream Networks UCM6200 User Manual

Group Settings

Name
Number
Announcements Center feature can be found under web UI->PBX->Value-added Features-> Announcements
Center. The following example demonstrates the usage of this feature.
1. Click
2. Give a name to the newly created group.
3. Create a group number which is used with code to send voice message.
4. Select the extensions to be included in the group, who will receive the voice message.
In this example, group "Test" has number 666. Extension 1000, 1001 and 1002 are in this group.
5. Click

Table 98: Group Settings

Configure a name for the newly created group to identify the group.
Configure the group number. The group number is used in combination with the
code. For example, if group number is 666, and code is 55. The user can dial
55666 to send prompt 55 to all members in group 666.
Note:
The combination number must not conflict with any number in the system such
as extension number or conference number.
to create new group.

Figure 186: Announcements Center Group Configuration

to create a new Announcement Center.
UCM6200 Series User Manual
P a g e | 284