During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to 720)
will be announced after parking the call.
Feature Misc->Call Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking lot
number (default range 701 to 720) will be announced after parking the call.
Retrieve The Parked Call
To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked call is
not retrieved after the timeout, the original extension who parks the call will be called back.
Enable Spy
If "Enable Spy" option is enabled, feature codes for Listen Spy, Whisper Spy and Barge Spy are available for
users to dial from any extension to perform the corresponding actions.
Assume a call is on-going between extension A and extension B, user could dial the feature code from extension
C to listen on their call (*54 by default), whisper to one side (*55 by default), or barge into the call (*56 by default).
Then the user will be asked to enter the number to call, which should be either side of the active call, extension
A or B in this example.
-------------------------------------------------------------------------------------------------------------------------- ------------------
Caution:
"Enable Spy" allows any user to listen to any call by feature codes. This may result in the leakage of user privacy.
-------------------------------------------------------------------------------------------------------------------------- ------------------
UCM6200 Series User Manual
P a g e
|
264