Fax/T.38; Configure Fax/T.38; Table 74: Fax/T.38 Settings - Grandstream Networks UCM6200 User Manual

The UCM6200 supports T.30/T.38 Fax and Fax Pass-through. It can convert the received Fax to PDF format and
send it to the configured Email address. Fax/T.38 settings can be accessed via Web GUI->PBX->Internal
Options->FAX/T.38. The list of received Fax files will be displayed in the same web page for users to view,
retrieve and delete.

Configure Fax/T.38


Click on "Create New Fax Extension". In the popped up window, fill the extension, name and Email address
to send the received Fax to.

Click on "Fax Settings" to configure the Fax parameters.
Enable Error
Correction Mode
Maximum Transfer
Rate
Minimum Transfer
Rate
Max Concurrent
Sending Fax
Fax Queue Length
Default Email Address
Template Variables

FAX/T.38

Table 74: FAX/T.38 Settings

Configure to enable Error Correction Mode (ECM) for the Fax. The default setting
is "Yes".
Configure the maximum transfer rate during the Fax rate negotiation. The
possible values are 2400, 4800, 7200, 9600, 12000 and 14400. The default
setting is 14400.
Configure the minimum transfer rate during the Fax rate negotiation. The possible
values are 2400, 4800, 7200, 9600, 12000 and 14000. The default setting is 2400.
Configure the concurrent fax that can be sent by UCM6200. Two mode "Only"
and "More" are supported.

Only
Under this mode, the UCM6200 allows only single user to send fax at a time.

More
Under this mode, the UCM6200 supports multiple concurrent fax sending by
the users.
By default, this option is set to "only".
Configure the maximum length of Fax Queue from 6 to 10. The default setting is
6.
Configure the Email address to send the received Fax to if user's Email address
cannot be found.
Note:
The extension's Email address or the Fax's default Email address needs to be
configured in order to receive Fax from Email. If neither of them is configured, Fax
will be not be received from Email.
Fill in the "Subject:" and "Message:" content, to be used in the Email when
sending the Fax to the users.
UCM6200 Series User Manual
P a g e | 230