Kyocera KM-2540 Service Manual page 50

3LH
Maintenance
item No.
Setting the system (communication 2)
U660
Description
Makes settings for fax transmission regarding the communication.
Purpose
To reduce transmission errors when a low quality line is used.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set.
The screen for the selected item appears.
Display
TCF CHECK 2
SHORT PRTCOL TX
SHORT PRTCOL RX
NUMBER OF CNG(F/T)
1-TOUCH ECM
Setting the criteria for receiving a TCF signal 2
Sets the signal checking time as a criterion for a received TCF signal.
1. Enter 1 or 2 using the numeric key to change the setting.
Display
1: LONG
2: SHORT
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the short protocol transmission
Sets if short protocol transmission is performed.
1. Change the setting using the numeric keys.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the reception of a short protocol transmission
Selects whether to receive or ignore transmission using short protocol.
If a short protocol transmission is received when an auto switching device is attached to the machine, commu-
nication problems, including auto switching inability, sometimes occur. Change the setting to ignore short pro-
tocol transmission to prevent such problems.
1. Change the setting using the numeric keys.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
1-3-28
Description
Description
Sets the criteria for receiving a TCF signal 2.
Sets the short protocol transmission.
Sets the reception of short protocol transmission.
Sets the CNG detection times in the fax/telephone auto select mode.
Turns ECM for one-touch dialing on/off.
Description
Checks for 1.0 s.
Checks for 0.8 s.
Description
Short protocol transmission is performed.
Short protocol transmission is not performed.
Description
Receives short protocol transmission.
Ignores short protocol transmission.