Kyocera KM-2540 Service Manual page 41

Maintenance
item No.
G3 cable equalizer
U611
Description
Sets the G3 cable equalizer.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set.
The screen for the selected item appears.
Display
REG. G3 TX EQR
REG. G3 RX EQR
Setting the G3 transmission cable equalizer
Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Change the setting using the numeric keys.
Display
1: 0
2: 18
3: 36
4: 72
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting the G3 reception cable equalizer
Perform the following adjustment to make the equalizer compatible with the line characteristics.
1. Change the setting using the numeric keys.
Display
1: 0
2: 18
3: 36
4: 72
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
Setting the modem detection level
U612
Description
Sets the modem detection level.
Purpose
To improve the transmission performance when a low quality line is used.
Method
Press the start key. The current setting is displayed.
Setting
1. Change the setting using the numeric keys.
Display
1: 33
2: 38
3: 43
4: 47
2. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the G3 transmission cable equalizer.
Sets the G3 reception cable equalizer.
Description
0 km
1.8 km
3.6 km
7.2 km
Description
0 km
1.8 km
3.6 km
7.2 km
Description
-33 dBm
-38 dBm
-43 dBm
-47 dBm
3LH
1-3-19