Kyocera KM-2540 Service Manual page 32

3LH
Maintenance
item No.
Setting the date format
U606
Selects the date format on the respective reports and sender's information record.
(cont.)
1. Change the setting using the numeric keys.
Display
1: YMD
2: MDY
3: DMY
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting if the image scanning quality in fax mode is initialized
Sets if the resolution is to be initialized when fax operation is complete.
1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting if the scanning density in fax mode is initialized
Sets if the scanning density is initialized when fax operation is complete.
1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Setting whether to skip unregistered one-touch key numbers on the list
Sets whether to skip unregistered one-touch key numbers on the list.
1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
1-3-10
Description
Description
Year/month/day
Month/day/year
Day/month/year
Description
Resolution is initialized.
Resolution is not initialized.
Description
Density is initialized.
Density is not initialized.
Description
Unregistered numbers are skipped.
Unregistered numbers are not skipped.