Siemens SCALANCE X-200 Configuration Manual page 85

Syntax of the Command Line Interface
Table 5- 16
Command
info
snmp [A | 3 | D]
readonly
getcomm [string]
setcomm [string]
traps [E | D]
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
Agent SNMP Configuration - CLI\AGENT\SNMP>
Description
Displays information on SNMP.
Enables either [A] all SNMP versions or [3] only SNMPv3
or [D] disables SNMP.
Enables / disables SNMPv1 read only mode.
Specifies the Read Community string.
Specifies the Write Community string.
Enables / disables SNMPv1 traps.
Menus in the WBM
5.3 The Agent menu
Comment
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only.
85