C-Plug - Siemens SCALANCE X-200 Configuration Manual

Menus in the WBM
5.1 The System menu
5.1.10

C-PLUG

C-PLUG Information
This page tells you whether a C-PLUG is inserted and whether it is valid for the X-200 IE
switch.
If a valid C-PLUG is inserted in the device, the page provides information about the IE switch
with which the current configuration was saved and C-PLUG itself.
The content of this page cannot be changed.
Figure 5-10
C-PLUG State
The status of the C-PLUG is displayed here.
● ACCEPTED
There is a C-PLUG with a valid and matching content inserted in the device.
● NOT ACCEPTED
No C-PLUG or C-PLUG inserted but invalid or incompatible content. This status is also
displayed if the C-PLUG was formatted during operation.
● NOT ACCEPTED, HEADER CRC ERROR
A C-PLUG with bad content is inserted.
64
C-PLUG Information
Configuration Manual, 03/2015, C79000-G8976-C285-06
SCALANCE X-200