Siemens SCALANCE X-200 Configuration Manual page 56

Menus in the WBM
5.1 The System menu
Firmware version
at least X-200 V4.3
at least X-200 V4.1
SSL Private Key File
Name of the file that contains the private key for SSL.
SSL Certificate File
Name of the file that contains the certificate for SSL
Note
The private key and the certificate for SSL are required to allow the user to communicate via
a secure connection with the Web server on the IE Switch X-200.
The files must be available in PEM format.
System Command Line Interface
Table 5- 4
Command
info
server [IP address] [:port]
fwname
fwload
fwsave
cfgname [file name]
cfgsave
cfgload
logname [file name]
logsave
pkname
pkload
ctname
ctload
56
IE switch
X204-2TS
XF204
XF204-2
XF206-1
XF208
System Save & Load TFTP - CLI\SYSTEM\LOADSAVE>
Description
Displays information on the system.
Specifies the IP address or the port of the TFTP
server with which data will be exchanged.
Specifies the name of the firmware file.
Loads the firmware from a file.
Saves the firmware in a file.
Specifies the name of a file (maximum 255 charac-
ters) from which the configuration data will be
loaded or in which this data will be saved.
Saves the configuration data in a file.
Loads the configuration data from a file.
Specifies the name of a file (maximum 255 charac-
ters) in which the log table is stored.
Saves the log table in a file.
Specifies the name of the file (maximum 255 char-
acters) that contains the private SSL key.
Loads the private SSL key from a file.
Specifies the name of the file (maximum 255 char-
acters) that contains the SSL certificate.
Loads the SSL certificate from a file.
Configuration Manual, 03/2015, C79000-G8976-C285-06
Comment
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only.
Administrator only
Administrator only
SCALANCE X-200