Siemens SCALANCE X-200 Configuration Manual page 103

Industrial ethernet switches
Hide thumbs Also See for SCALANCE X-200:
Table of Contents

Advertisement

Key
Enter the key to be used for signing.
Permitted values for the key: an ASCII string with up to 11 characters or a hexadecimal
string with up to 40 characters.
Enable Secure NTP
Select this function to check the signing of the frames.
Syntax of the Command Line Interface
Table 5- 23
Command
info
timec [E | D]
server [IP address]
[:port]
tinitpoll [1000 -
100000ms]
tpoll [10 - 100000sec]
ttype [P | L | S | N | M]
time [date] [time]
offset [+/-] <offset>
Table 5- 24
Command
server <number> <IP> Specifies the IP address of the NTP server indicated
initint [1 ... 10000]
interval [1 ... 160]
SCALANCE X-200
Configuration Manual, 03/2015, C79000-G8976-C285-06
Agent Time Client Configuration - CLI\AGENT\TIME>
Description
Displays information on the time settings of the IE
switch.
Enables / disables the time settings of the IE switch.
Sets the IP address and the port of the server.
Specifies the time during two time polls if no time in-
formation has yet been received. You can enter a
value between 1000 and 100000 milliseconds.
Specifies the time between two time polls. You can
enter a value between 10 and 100000 seconds.
Specifies how the time is set:
- P SNTP Poll
- L SNTP Listen
- S Siemens
- N NTP
- M Manual.
If no parameters are set, this command shows the
time. By entering a time in the format
MM/DD/YYYY hh:mm:ss
You set the time.
Specifies the deviation between coordinated universal
time (UTC) in minutes.
Agent Time Client Configuration - CLI\AGENT\TIME\NTP>
Description
by "number". You can specify IP addresses for a max-
imum of four NTP servers.
Specifies the time between two NTP polls if no time
information has yet been received. You can enter a
value between 1 and 10000 milliseconds.
Specifies the interval between two NTP polls. You can
enter a value between 1 and 160 seconds.
Menus in the WBM
5.3 The Agent menu
Comment
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Administrator only
Comment
Administrator only
Administrator only
Administrator only
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents