Drawing An Intrusion Region - Swann pro-series hd Instruction Manual

Drawing an Intrusion Region

12-09-2016 Fri 09:30:15
1. Draw Quadrilateral:
A quadrilateral is a polygon with four sides and four
corners (basically a square shape). Click this button then using the mouse,
you need to create four points to draw an intrusion region (it can be drawn at
any size within the image). Your DVR does not allow lines to be crossed when
drawing an intrusion region. If needed, change the rule number to draw a
new intrusion region.
As an example, click once at the start point then move right and click once to
create the second point. Move the mouse down and click once to create the
third point then move left and click once to create the fourth point (see above
right example).
2. Clear All: Click this button to clear the selected intrusion region.
After drawing an intrusion region, click "Rule Settings" then move the sliders
to increase or decrease the options available. When finished, click the "Ap-
ply" button to save settings.
Click for contents
1
2
Camera 01
12-09-2016 Fri 9:30:15
Up to four intrusion regions can be drawn at any size, giv-
ing you flexibility on how motion is detected.
Please note:
It's very important that you change the recording schedule
for the camera you've selected, otherwise VCA motion events will not
be recorded. When changing the recording schedule, you need to select VCA
(from the event types available) and edit the day and time period that you
want to apply this to - see page 31 for more information.
· Click the "Back" button to go back to the Menu.
Camera 01
26