Swann pro-series hd Instruction Manual page 13

Record: Parameters - Record
Max. Average Bitrate (Kbps):
With H.264+ enabled, you can change the max-
imum average bitrate. For cameras that monitor medium to high traffic ar-
eas, increase the bitrate (between 4000 and 8000) to add more detail to the
camera's image. For cameras that monitor low traffic areas, decrease the
bitrate (between 1000 to 3000). Change the bitrate in small doses until you
are satisfied with the image quality.
Click "More Settings" to reveal the following options:
Pre-record:
This reduces the chance of an event not being recorded. We rec-
ommend changing this to 10 seconds (10s).
Post-record: Same as above but your DVR will continue recording after an
event has occurred. 30 seconds (30s) is the recommended length.
Expired Time (day):
Determines how long the video footage will remain on
the hard drive without it being overwritten.
Click for contents
Record Audio:
Click the checkbox to record audio when selecting "Video &
Audio" for the stream type.
· Don't forget to click "Apply"
to save settings.
· Use the "Copy" function to
apply all settings to the other
cameras.
· Click the "Back" button to go
back to the Menu.
13