Configuration: Exceptions - Swann pro-series hd Instruction Manual

Configuration: Exceptions

Whenever there is an
event or if your DVR dis-
plays abnormal or unu-
sual behaviour, you can
be alerted to in multiple
ways such as receiving
an email, receiving an
alert via the SwannView
Plus Windows software
and activating its inter-
nal buzzer.
Enable Event Hint:
When an event occurs, a message will appear on-screen.
Click the checkbox if you wish to disable on-screen messages.
Event Hint Settings: You can select which event messages will appear on-
screen.
Exception Type:
Select the event type you would like your DVR to react to:
HDD Full:
As the name suggests, this event occurs when the hard drive has
run out of space. This does not occur if "Overwrite" is enabled by default - see
page 32 for more information.
HDD Error:
When your DVR has difficulty accessing the hard drive.
Network Disconnected: When your DVR has been disconnected from your
network and can no longer connect to the internet.
IP Conflicted:
When your DVR detects a conflicting IP address.
Click for contents
Illegal Login:
When your DVR detects an incorrect login.
Camera/Recording Resolution Mismatch:
not capable of matching the recording resolution selected.
Record Exception: When there is one or more errors during capture such as
a hard drive failure or if the hard drive quota has been changed.
Audible Warning:
Click the checkbox to enable your DVR's internal buzzer.
Alert CMS Software:
Click the checkbox to receive an alert via the Swan-
nView Plus Windows software that's installed on your computer (software
must be running to receive alerts).
Send Email: Click the checkbox to receive an email alert.
· Don't forget to click "Apply"
to save settings.
· Click the "Back" button to go
back to the Menu.
When the camera connected is
59