Camera: Image - Swann pro-series hd Instruction Manual

Camera: Image

You can adjust the vari-
ous settings available to
help fine-tune the cam-
era's overall image qual-
ity. At night, images that
you see from the cam-
era may have increased
noise. By tweaking these
settings, you can elimi-
nate noise and increase
image clarity.
Camera:
Select a camera that you would like to edit.
Time Segment 1 & 2:
This function gives you the ability to assign a particular
pre-set mode or customised settings for two time segments. For example,
one time segment for daytime and the second time segment for night time.
Select the time segment that you want to edit then click to the right to set the
start and end time (24-hour time).
Mode:
If you don't want to adjust the settings manually, you can select from a
number of different pre-set modes available.
To adjust settings, use the slider to increase or decrease or press the up and
down arrow buttons to change sequentially. The higher the number, the more
sensitive the setting will be.
Brightness:
This changes how light the image appears to be.
Contrast:
This increases the difference between the blackest black and the
Click for contents
12-09-2016 Fri 09:30:15
Camera 02
whitest white in the image. Don't set the contrast too high as it will degrade
the image quality.
Saturation:
the saturation, the more bright and vivid colors will appear.
Hue:
This changes the color mix of the image.
Sharpness:
creasing the sharpness will also increase the level of video noise that is vis-
ible.
Denoising:
signal. This is especially useful for night time or low light environments.
Please note:
fect your recordings.
· Don't forget to click "Apply"
to save settings.
· Use the "Copy" function to
apply all settings to the other
cameras.
· Click the "Default" button to
revert back to default settings.
· Click the "Back" button to go
back to the Menu.
This alters how much color is displayed in the image. The higher
Increase or decrease the overall sharpness of the image. In-
Is a technique of reducing or removing image noise from a video
Any changes made to the image settings available will af-
16