Camera: Vca - Line Crossing Detection - Swann pro-series hd Instruction Manual

Camera: VCA - Line Crossing Detection

VCA (Video Content
Analysis) provides you
with much greater con-
trol on how your DVR de-
tects motion. By drawing
a detection line, you can
apply a rule on which di-
rection your DVR detects
motion. You can also de-
fine specific areas for In-
trusion Detection.
Camera:
Select a camera that you would like to edit. VCA can be applied to a
maximum of two cameras only.
Line Crossing Detection is selected by default. For instructions on Intrusion
Detection - see page 25.
Enable:
Click the checkbox to enable.
Settings:
Define what will happen when motion has been detected:
Trigger Channel:
Select additional cameras to start recording.
Arming Schedule:
Adjust your arming schedule by selecting a start day and a
time period (24-hour time). Click the "Copy" button to apply all settings to the
other cameras. Click "Apply" to save settings then click "OK" to exit.
Linkage Action: Options available are full screen monitoring, enabling your
DVR's internal buzzer, send alerts to the SwannView Plus Windows software
(software must be running on your computer to receive alerts) and to send an
Click for contents
12-09-2016 Fri 09:30:15
Camera 03
email. Click "Apply" to save settings then click "OK" to exit.
Rule:
Up to four detection lines can be enabled (one detection line per rule).
Click "Rule Settings" to reveal the following options:
Direction A<->B:
from both directions.
Direction A->B:
direction A only.
Direction B->A:
direction B only.
Sensitivity:
number, the more sensitive the detection will be.
See page 24 for instructions on how to draw a detection line.
· Don't forget to click "Apply"
to save settings.
· Click the "Back" button to go
back to the Menu.
Motion is detected when an object has crossed the line
Motion is detected when an object has crossed the line from
Motion is detected when an object has crossed the line from
Adjust the sensitivity level of the detection line. The higher the
23