Mac Authentication - ZyXEL Communications XMG3512-B10A User Manual

Table 22 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL
Max. Upstream
Bandwidth
Max.
Downstream
Bandwidth
BSSID
SSID Subnet
DHCP Start
Address
DHCP End
Address
SSID Subnet
Mask
LAN IP
Address
Security Level
Security Mode
Apply
Cancel

7.4 MAC Authentication

This screen allows you to configure the Zyxel Device to give exclusive access to specific devices (Allow)
or exclude specific devices from accessing the Zyxel Device (Deny). Every Ethernet device has a unique
MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of six
pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses
of the devices to configure this screen.
Chapter 7 Wireless
DESCRIPTION
Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in kilobits per
second (Kbps).
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in kilobits
per second (Kbps).
This shows the MAC address of the wireless interface on the XMG when wireless LAN is enabled.
Select Enable if you want the wireless network interface to assign DHCP IP addresses to the
associated wireless clients.
Specify the first of the contiguous addresses in the DHCP IP address pool.
The XMG assigns IP addresses from this DHCP pool to wireless clients connecting to the SSID.
Specify the last of the contiguous addresses in the DHCP IP address pool.
Specify the subnet mask of the XMG for the SSID subnet.
Specify the IP address of the XMG for the SSID subnet..
Select Basic (WEP) or More Secure (WPA(2)-PSK) to add security on this wireless network. The
wireless clients which want to associate to this network must have same wireless security settings
as the XMG. After you select to use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 7.2.1 on page 87
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
XMG3512-B10A User's Guide
for more details about this field.
92