The Nat Status Screen - ZyXEL Communications XMG3512-B10A User Manual

Table 102 System Monitor > Traffic Status > LAN (continued)
LABEL
Bytes Received
Interface
Sent (Packets)
Data
Error
Drop
Received (Packets)
Data
Error
Drop

22.4 The NAT Status Screen

Click System Monitor > Traffic Status > NAT to open the following screen. The figure in this screen shows
the NAT session statistics for hosts currently connected on the XMG.
Figure 132 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 103 System Monitor > Traffic Status > NAT
LABEL
Refresh Interval
Device Name
IPv4 Address
MAC Address
No. of Open
Session
Total
Chapter 22 Traffic Status
DESCRIPTION
This indicates the number of bytes received on this interface.
This shows the LAN or WLAN interfaces.
This indicates the number of transmitted packets on this interface.
This indicates the number of frames with errors transmitted on this interface.
This indicates the number of outgoing packets dropped on this interface.
This indicates the number of received packets on this interface.
This indicates the number of frames with errors received on this interface.
This indicates the number of received packets dropped on this interface.
DESCRIPTION
Select how often you want the XMG to update this screen.
This displays the name of the connected host.
This displays the IPv4 address of the connected host.
This displays the MAC address of the connected host.
This displays the number of NAT sessions currently opened for the connected host.
This displays what percentage of NAT sessions the XMG can support is currently being used by
all connected hosts. You can also see the number of active NAT sessions and the maximum
number of NAT sessions the XMG can support.
XMG3512-B10A User's Guide
209