Table of Contents
Advertisement
Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued)
LABEL
DESCRIPTION
6RD
The 6RD (IPv6 rapid deployment) fields display when you set the IPv6/IPv4 Mode field to IPv4 Only. See
Deployment on page 64
for more information.
6RD
Select Enable to tunnel IPv6 traffic from the local network through the ISP's IPv4 network.
Select Manually Configured if you have the IPv4 address of the relay server. Otherwise, select
Automatically configured by DHCPC to have the XMG detect it automatically through DHCP.
The Automatically configured by DHCPC option is configurable only when you set the method of
encapsulation to IPoE.
Service Provider
Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP's border relay router and connecting to the
IPv6 Prefix
native IPv6 Internet.
IPv4 Mask
Enter the subnet mask number (1~32) for the IPv4 network.
Length
Border Relay
When you select Manually Configured, specify the relay server's IPv4 address in this field.
IPv4 Address
DHCPC Options (This is available only when you select IPv4 Only or IPv4 IPv6 DualStack in the IPv4/IPv6 Mode field.)
Request Options Select Option 43 to have the XMG automatically add vendor specific information in the DHCP
packets to request the vendor specific options from the DHCP server.
Select Option 121 to have the XMG push static routes to clients.
Sent Options
option 60
Select this and enter the device identity you want the XMG to add in the DHCP discovery
packets that go to the DHCP server.
Vendor ID
Enter the Vendor Class Identifier, such as the type of the hardware or firmware.
option 61
Select this and enter any string that identifies the device.
IAID
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN connection
index number.
DUID
Enter the hardware type, a time value and the MAC address of the device.
option 125
Select this to have the XMG automatically generate and add vendor specific parameters in the
DHCP discovery packets that go to the DHCP server.
IPv6 Address (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode field.)
Obtain an IPv6
Select Obtain an IPv6 Address Automatically if you want to have the XMG use the IPv6 prefix
Address
from the connected router's Router Advertisement (RA) to generate an IPv6 address.
Automatically
Static IPv6
Select Static IPv6 Address if you have a fixed IPv6 address assigned by your ISP. When you select
Address
this, the following fields appear.
IPv6 Address
Enter an IPv6 IP address that your ISP gave to you for this WAN interface.
Prefix Length
Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.
IPv6 Default
Enter the IP address of the next-hop gateway. The gateway is a router or switch on the same
Gateway
segment as your XMG's interface(s). The gateway helps forward packets to their destinations.
IPv6 Routing Feature (This is available only when you select IPv4 IPv6 DualStack or IPv6 Only in the IPv4/IPv6 Mode
field. You can enable IPv6 routing features in the following section.)
MLD Proxy
Select this checkbox to have the XMG act as an MLD proxy on this connection. This allows the
Enable
XMG to get subscription information and maintain a joined member list for each multicast group.
It can reduce multicast traffic significantly.
Apply as Default
Select this option to have the XMG use the WAN interface of this connection as the system
Gateway
default gateway.
Chapter 6 Broadband
XMG3512-B10A User's Guide
70
IPv6 Rapid
- Quick Links:
- Introducing the Xmg
Hide quick links:
Advertisement
Table of Contents
