Bss; Mbssid - ZyXEL Communications XMG3512-B10A User Manual

7.9.5 BSS

A Basic Service Set (BSS) exists when all communications between wireless stations or between a wireless
station and a wired network client go through one access point (AP).
Intra-BSS traffic is traffic between wireless stations in the BSS. When Intra-BSS traffic blocking is disabled,
wireless station A and B can access the wired network and communicate with each other. When Intra-
BSS traffic blocking is enabled, wireless station A and B can still access the wired network but cannot
communicate with each other.
Figure 44 Basic Service set

7.9.6 MBSSID

Traditionally, you need to use different APs to configure different Basic Service Sets (BSSs). As well as the
cost of buying extra APs, there is also the possibility of channel interference. The XMG's MBSSID (Multiple
Basic Service Set IDentifier) function allows you to use one access point to provide several BSSs
simultaneously. You can then assign varying QoS priorities and/or security modes to different SSIDs.
Wireless devices can use different BSSIDs to associate with the same AP.
7.9.6.1 Notes on Multiple BSSs
• A maximum of eight BSSs are allowed on one AP simultaneously.
• You must use different keys for different BSSs. If two wireless devices have different BSSIDs (they are in
different BSSs), but have the same keys, they may hear each other's communications (but not
communicate with each other).
• MBSSID should not replace but rather be used in conjunction with 802.1x security.
Chapter 7 Wireless
XMG3512-B10A User's Guide
103