Add New Application; The Port Triggering Screen - ZyXEL Communications XMG3512-B10A User Manual

Table 57 Network Setting > NAT > Applications (continued)
LABEL
Server IP
Address
Modify

11.3.1 Add New Application

This screen lets you create new NAT application rules. Click Add New Application in the Applications
screen to open the following screen.
Figure 80 Network Setting > NAT > Applications: Add
The following table describes the labels in this screen.
Table 58 Network Setting > NAT > Applications: Add
LABEL
WAN Interface
Server IP
Address
Application
Category
Application
Forwarded
View Rules
OK
Cancel

11.4 The Port Triggering Screen

Some services use a dedicated range of ports on the client side and a dedicated range of ports on the
server side. With regular port forwarding you set a forwarding port in NAT to forward a service (coming in
Chapter 11 Network Address Translation (NAT)
DESCRIPTION
This field displays the destination IP address for the service.
Click the Delete icon to delete the rule.
DESCRIPTION
Select the WAN interface that you want to apply this NAT rule to.
Enter the inside IP address of the application here.
Select the category of the application from the drop-down list box.
Select a service from the drop-down list box and the XMG automatically configures the
protocol, start, end, and map port number that define the service.
Click this to display the configuration of the service that you have chosen in Application
Fowarded.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
XMG3512-B10A User's Guide
155