Samsung OfficeServ 7000 Series Programming Manual page 459

8 ISDN SS FEATURE
9 SPNET OVERLAP
10 SPNET CLI TABLE
11 E-LCR CLI TABLE
12 EXTERNAL BGM/MOH
13 LCP CABINET TYPE
14 MAX CHAIN FWDALL
15 PINGRING SERVICE
A CTION
1 0 4 1 B
1) Press Transfer button and enter 861.
Display shows:
2) Enter the option number.
OR
Press Volume button to select and press
Right Soft button to move cursor.
3) Enter 1 or 0 to enable or disable.
OR
Press Volume button to select and press
Right Soft button to store.
4) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
Samsung Business Communications
Decides whether ISDN SS(Supplement Service) is used or not.
(ISDN SS Feature is always enabled in OfficeServ 7100 /
ficeServ 7030.)
Designate whether to operate as the OVERLAP Mode in case of
SPNET Dialing.
This is the option to display the designated CLI number instead
of the (NODE + extension number) in the CLIP table of the
MMC323 when the network call is received in the KB net.
This is the option to comply with the clip table in case of the E-
LCR Call.
Backgroud music source can use internal source or external
source. In case of external source, music source can be sup-
ported in MISC port. OfficeServ 7100
supports this function
The OfficeServ 7200 can also use the OfficeServ 7100 as a ex-
pansion cabinet. This option can be shown in the OfficeServ
7200.
0: OS7200 CABINET
1: OS7100 CABINET
If ALL CALL FORWARD or BUSY FORWARD is set, it is possi-
ble to designate how many hops can be supported.
This is the option to support PING RING SERVICE. The PING
RING SERVICE means that the stations which are same pickup
group can display the information of a call and ring after desig-
nated time just one time.
CHAPTER 2. MMC Programming
/ OfficeServ 7030 only
DISPLAY
A U TO UPDATE TIME
U U
DISABLE
AUTO UPDATE TIME
D I SABLE
U U
A U TO UPDATE TIME
U U
ENABLE
Of-
2-417