Samsung OfficeServ 7000 Series Programming Manual page 295

No
10 VIRT EXT DIAL NO
11 MGI DIAL NO.
12 IP STN DIAL NO.
13 WLAN DIAL NO,
14 SPNET DIAL NO
15 H323 TRK DIAL NO
16 SIP TRK DIAL NO
17 UMS DIAL NUMBER
18 SIP STN DIAL NUMBER
19 REMOTE STN NUMB
NO
00 STN NUMB.
01 TRK NUMB.
02 VMAA NUMB.
03 MISC NUMB.
04 MGI NUMB.
05 S0 NUMBER
06 GROUP NUMBER
07 FEATURE NUMBER
Samsung Business Communications
Type of Dial No
This is where virtual station directory numbers are
changed or assigned.
This is where MGI port directory numbers are changed or
assigned.
This is where IP-based station directory numbers are
changed or assigned.
This is where IP-based station directory numbers are
changed or assigned.
This is where Samsung proprietary switch-to-switch VoIP
networking trunk signalling port directory numbers are
changed or assigned.
This is where VoIP H.323 trunk signalling port directory
numbers are changed or assigned.
This is where VoIP SIP trunk signalling port directory
numbers are changed or assigned.
This is where IP UMS port directory numbers are
changed or assigned. OfficeServ 7100 does not support
this function.
This is where VOIP SIP station port directory numbers are
changed or assigned
This is where Remote station port numbers are changed
or assigned.
Type of Dial No
This is where station directory numbers are changed or
assigned
This is where trunk directory numbers are changed or
assigned.
This is where VM/AA directory numbers are changed or
assigned.
This is where directory numbers for relays, MOH ports
and the alarm sensor are changed or assigned.
This is where MGI port directory numbers are changed or
assigned.
This is where directory numbers for BRI station ports are
changed or assigned. (This MMC is not shown in Office-
Serv 7030)
This is where station or trunk group numbers are changed
or assigned.
This is where feature access codes are changed or as-
signed. Dialling codes are entered via the dial keypad by
CHAPTER 2. MMC Programming
(continued)
Description
Description
2-253