836] H.323 Gk Options - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 836] H.323 GK OPTIONS

2 3 8 B
Provides a means to set the H.323 gatekeeper parameters for an optional, external industry-
standard H.323 network gatekeeper, using Registration, Admissions and Status signalling
(RAS). The settings apply system wide.
When changing IP
When changing any IP address/value, listed below, three digits must be input for
each(octet) field. Example 192.168.1.10 input must be: 192 168 001 010
This MMC is not shown in OfficeServ 7030.
No Parameter
00 GK CONNECTION
01 GK ROUTING
02 GK IP ADDRESS
03 GK NAME
04 ALTER GK IP ADDR
05 H.323 GATEWAY ID
06 E.164 GATEWAY
NO
07 GK KEEP ALIVE
08 GK DOWN ROUTE
09 GK RAS TYPE
10 URQ REASON
MODE
12 RRQ FAIL TIME
2-358
Description
This enables the H.323 call to connect to a gate-
keeper.
This enables routing of calls through a gatekeeper.
This is the gatekeeper's IP address.
This is the alphanumeric identifier of the gate-
keeper.(Up to 16 characters.)
This provides an alternate gatekeeper address.
This is the H.323 identifier used by the MGI when
registering with the gatekeeper.(Up to 32 charac-
ters.)
This is the E.164 identifier used by the H.323 trunk
when registering with the gatekeeper.(Up to 16
digits long.)
This is the timer that the MGI uses to acknowledge
the presence of the gatekeeper. The range is
000~999 seconds.
This provides an alternate route if the primary gate-
keeper is down. Selections are PSTN or ALTER
GK.
Select if AUTO or MANUAL, depending on your
gatekeeper's capabilities.
Select ON or OFF for use of Un-register Request
RAS(URQ) messages.
Programs the time frame to re-send Registration
Request RAS(RRQ) messages to a gatekeeper.
The range is 1~99.
Default
DISABLE
DISABLE
0.0.0.0
'Gatekeeper'
0.0.0.0
'OfficeServ'
1234
0 SEC
PSTN
AUTO
ON
30 seconds
Samsung Business Communications