Samsung OfficeServ 7000 Series Programming Manual page 203
Hide thumbs
Also See for OfficeServ 7000 Series:
- Programming manual (487 pages) ,
- User manual (193 pages) ,
- System administration manual (46 pages)
Table of Contents
Advertisement
Timer Name
FIRST DIGIT TIME
HOK FLASH MAX TM
HOK FLASH MIN TM
HOOK OFF TIME
HOOK ON TIME
INQUIRY RELEASE
INTER DIGIT TIME
ISDN INT DGT TM
KMMC LOCK OUT TM
LCR ADVANCE TIME
LCR INTER DIGIT
LONG KEY DETECT
LONG KEY REPEAT
MCL DELAY TIME
Samsung Business Communications
Default
Range Unit
10
1-250 SEC
120
20-2500
MSEC
70
20-2500
MSEC
100
20-2500
MSEC
200
20-2500
MSEC
30
1-250 SEC
10
1-250 SEC
7
1-15 SEC
30
10-50 SEC
5
1-250 SEC
5
1-250 SEC
600
0-2500
MSEC
300
0-2500
MSEC
4
0-9 SEC
CHAPTER 2. MMC Programming
Description
This timer controls how long the system will
wait for dialling to begin before dropping the
dial tone and returning the you to error tone.
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental
hookswitch bounce LONGEST duration.
This timer monitors the duration of a hook-
switch flash to ensure that the flash is valid
and not a line noise or an accidental hook-
switch bounce SHORTEST duration.
This timer controls the time before dial tone is
sent to a single line station.
This timer sets the minimum amount of time that
the system will recognize as an SLT hang up.
This timer monitors the duration of the
interaction of the Soft button to determine
when to return the LCD back to a normal
status. This timer affects only display phones.
This timer controls the grace period between
dialling valid digits before dropping the call
and returning you back to error tone.
This timer controls the grace period between
dialling valid digits and the end of the dialling
string on an ISDN call.
This timer controls the grace period between
programming actions while in a programming
session. The timer automatically returns the
system to secure programming status.
This timer controls the time before selecting
the next allowable route when a station is
allowed to route advance.
This timer controls the grace period between
dialling valid digits before accessing a trunk.
This timer controls the time a key must be held
down before the key press is repeated.
This timer controls the time between repeated
digits on a long key press.
This timer controls the time when the system
should start transmitting Authorisation Code
after sending MCL access code(Cable&
Wireless 131 access). Available in UK only.
(continued)
2-161
Advertisement
Table of Contents
