Samsung OfficeServ 7000 Series Programming Manual page 418

CHAPTER 2. MMC Programming
20 ITP MAX TX LIMIT
21 WIP DSP PARA
D EFAULT DATA
9 9 3 B
SEE DESCRIPTION
A CTION
9 9 4 B
1) Press Transfer button and enter 841.
Display shows the first available option.
2) Enter option category number 0-13 via dial
Keypad.(e.g., 2)
OR
Press Volume button to make select and
press Right Soft button to move cursor.
3) Enter option number via dial keypad.
OR
2-376
SIP Stack.
- NON SEC SIP: Number of using the standard SIP
terminals except for Samsung terminals
In case of the standard IP terminals other than Sam-
sung terminals, they use the SIP Stack, and the num-
ber of the users cannot be changed. Namely, the al-
lowed number is fixed when publishing the license.
- FREE COUNT: This indicates the number of the
available SIP STACK.
- SIP TRUNK: The number of the SIP STACK which is
to be used as the SIP TRUNK can be designated
within the FREE COUNT number.
- SIP PHONE: The number of the SIP STACK which is
to be used by the Samsung standard SIP terminal can
be designated within the FREE COUNT number.
- WIP PHONE: The number of the SIP STACK which
is to be used by the WIP terminal can be designated
within the FREE COUNT number.
- IP-UMS/IVR: The number of the SIP STACK which is
to be used by the IP-UMS/IVR can be designated
within the FREE COUNT
OfficeServ 7030 is not supported.
TX level which is in case of uring MGI or not can be
restricted for voice quality of IP Phone.
Designate the DSP parameter of the WLAN phone
- M-FRAME : The length of voice data.
- ECHOCNCL : The option for using Echo Cancel
function.
number. OfficeServ 7100/
DISPLAY
P H ONE VERSION
U U
DS-5012L :
ITP REGISTRATION
T Y PE: SYS PSWD
U U
ITP REGISTRATION
PSWD: 1 2 34
U U
Samsung Business Communications
NO
40MSEC
ENABLE