827] Crm Dsp Mode Select - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 827] CRM DSP MODE SELECT

2 2 9 B
CRM D-Board has 2 DSPs and each DSP is operated one mode of DTMFR, R2MFC, CID.
This MMC can assign CRM DSP mode. If there is not CRM Board in LP40, displays 'NO
CRM'.
C ONDITION
9 4 7 B
CRM board must be equiped in LP40.
MMC [827]
This MMC is only shown in OfficeServ 7400. OfficeServ 7400 only supports CRM
D-Board.
D EFAULT DATA
9 4 8 B
DSP1: DTMFR, DSP2:DTMFR
A CTION
9 4 9 B
1) Press Transfer button and enter 827.
Display shows:
2) Dial the cabinet number.(1-3)
OR
Press Volume button to select and press
Right Soft button to move cursor.
3) Dial the LOC number.(1-2)
OR
Press Volume button to select and press
Right Soft button to move cursor.
4) Dial the DSP number.(1-2)
OR
Press Volume button to select and press
Right Soft button to move cursor.
5) Dial digit to select CRM mode.(0-2)
OR
Press Volume button to select and press
Right Soft button to move cursor.
6) Press Transfer button to save and exit.
OR
Press Speaker button to advance to next MMC.
2-334
DISPLAY
C: 1 - LOC:1-DSP:1
U U
DTMFR DTMFR
C:1-LOC: 1 - DSP:1
U U
DTMFR DTMFR
C:1-LOC:1-DSP: 1
U
DTMFR DTMFR
C:1-LOC:1-DSP: 1
U
DTMFR DTMFR
C:1-LOC:1-DSP:1
DTMFR D T MFR
U U
Samsung Business Communications