804] Sys I/O Mode - Samsung OfficeServ 7000 Series Programming Manual

CHAPTER 2. MMC Programming

[ 804] SYS I/O MODE

2 1 0 B
This is the program to designate the variable of the input/output port of the system. There
are the input/output ports which can be designated and used by maximum two users in the
system. Together with the MODEM port, there are total three input/output ports in the sys-
tem. The input/output ports which can be designated by the user are the second port and the
third port from the left side of the IOM board. The first port from the left side of the IOM
board is dedicated to check the system status. This port cannot be designated and used by
the user arbitrarily. In addition, there is the LAN port in the MCP2 port.
There is only one input/out port in the OfficeServ 7100 system and PCMMC service is
only usable.
One
REMO M/A can be designated, and it is available to
S ERVICE: Service type
1 0 8 8 B
Number
00 NOT USE
01 PCMMC
B AUD RATE: Transmission time
1 0 8 9 B
Option
0
1
2
3
C HAR LENGTH: Length of the characters
1 0 9 0 B
Option
7
8
2-300
. However, in the MODEM port, only the PCMMC
Service Type
4800 bps
9600 bps
19200 bps
38400 bps
7 bits
8 bits
.
Description
PCMMC, Remote M & A
Setting Value
Setting Value
Samsung Business Communications