Table of Contents
Advertisement
5-57 CHASSIS
SIDE STAND REMOVAL AND INSTALLATION
• Support the motorcycle with jack or wooden block.
• Remove the original side stand by removing mounting nut
and bolt.
• Apply SUZUKI SUPER GREASE" A" to the side stand
pivot portion and spring hooks.
~
99000-25030: SUZUKI SUPER GREASE "A"
• Install the optional shorter side stand (silver-colored) and
springs correctly as shown in the illustration.
• Tighten the side stand mounting bolt and nut to the speci-
fied torque.
~
Bolt: 50 N·m (5.0 kg-m, 36.0 Ib-ft)
Nut: 55 N-m (5.5 kg-m, 40.0 Ib-ft)
.A
WARNING
A new, shorter, silver-colored optional side stand must
be installed for safe parking.
NOTE:
Make sure that the side stand switch operation after in-
stalling the side stand.
WARNING LABEL
• Attach the warning label (optional part) to the swingarm
as shown in the illustration.
NOTE:
Select the appropriate language label for your country.
Warning label
Tire pressure label
Swingarm left side
Advertisement
Table of Contents
