Table of Contents
Advertisement
LAMPS
HEADLIGHT
Headlight bulb: 12V 60/SSW
Position light bulb: 12V 4W (Except E-03,24,28,33)
NOTE:
Adjust the headlight, both vertical and horizontal, after reassembling_
BULB REPLACEMENT
• Remove the headlight. (Refer to page 5-21.)
• Disconnect the socket
CD
and remove the rubber cap
@.
• Remove the bulb
@
by unlocking the bulb holder spring
@.
• Reassemble the bulb in the reverse order of removal.
I
A
CAUTION
I
When replacing the headlight bulb, do not touch the
glass_ Grasp the new bulb with a clean cloth. If you
touch the bulb with your bare hands, clean it with a
cloth moistened with alcohol or soapy water to prevent
early failure_
ELECTRICAL SYSTEM 6-24
Advertisement
Table of Contents
