Table of Contents
Advertisement
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear swingarm and suspension
in the reverse order of removal and disassembly. Payatten-
tion to the following points:
SWINGARM BEARING
• Install the new bearing with the special tool.
Bm
09941-34513: Bearing installer
NOTE:
When installing the bearing, punch-marked side of bearing
faces outside.
CUSHION LEVER BEARING
• Install the new bearing with the special tool.
,·&11
09924-84521: Bearing installer
NOTE:
When installing the bearing, punch-mark side of bearing
faces outside.
• Remount the rear suspension. (Refer to page 5-45.)
CHASSIS 5·44
Advertisement
Table of Contents
