Table of Contents
Advertisement
• Remove the thrust washer
G)
and primary driven gear as-
sembly.
• Remove the thrust washer
@.
• Remove the primary drive gear nut with the special tool.
a
09910-20116: Conrod holder
I
A
CAUTION
I
I
This nut has left-hand thread nut.
• Remove the cam drive chain
@
and key
@.
• Remove the idle gear and oil pump driven gear by remov-
ing the circlips.
a
09900-06107: Snap ring pliers
• Remove the oil pump by removing the mounting screws.
• Remove the breather cover.
• Remove the neutral position indicator switch.
NOTE:
Do not loose the switch contact
®
and spring
®.
ENGINE 3·14
Advertisement
Table of Contents
