Table of Contents
Advertisement
3·45 ENGINE
• After installing the countershaft assembly and driveshaft
assembly into the right crankcase, fit the gearshift forks
CD,
@
and
@
into the gearshift fork grooves.
CD
For Top driven gear (No.1)
@
For 4th driven gear (No.2)
@
For 3rd drive gear (No.3)
NOTE:
Three kinds of gearshift forks,
CD,
@
and@ are used. They
resemble each other very closely in external appearance and
configuration.
Carefully examine the illustration for correct installing posi-
tions and directions.
• Position the gearshift cam as shown in photo so that the
gearshift fork shafts can be installed easily.
NOTE:
When replacing the gearshift cam stopper bolt
@,
apply a
small quantity of THREAD LOCK
"1342"
to the threaded
part of the bolt.
-tta
99000-32050: THREAD LOCK "1342"
• Hook the gearshift cam stopper spring.
Advertisement
Table of Contents
