Panasonic WV-S2500 Series Operating Instructions Manual page 100

2 Settings
[Brightness]
Adjust the brightness.
If you move the slider in the "+" direction, the image will become brighter.
If you move the slider in the "-" direction, the image will become darker.
Click the [Reset] button to reset to the default brightness setting.
•
Default: 64
[Maximum gain]
Adjusts the maximum gain. When the luminance of the subject becomes darker, gain will be automatically
increased and screen will become brighter. If you increase the gain, the noise may also increase.
If you move the slider in the "+" direction, the maximum gain will increase.
If you move the slider in the "-" direction, the maximum gain will decrease.
Click the [Reset] button to reset to the default setting.
•
Default: 11
[Maximum shutter]
The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording
duration.
–
When "2 mega pixel [16:9](60fps mode)" or "1.3 mega pixel [16:9](60fps mode)" is selected for "Image
capture mode":
Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.1/100s, Max.
2/120s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
–
When "2 mega pixel [16:9](30fps mode)", "1.3 mega pixel [16:9](30fps mode)", "3 mega pixel [4:3](30fps
mode)", or "1.3 mega pixel [4:3](30fps mode)" is selected for "Image capture mode":
Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.1/100s, Max.
2/120s, Max.2/100s, Max.3/120s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.16/30s
•
Default: Max.1/30s
Note
•
When "On" is selected for "Super Dynamic(SD)", "Max.1/2000s" and "Max.1/4000s" are not available.
•
When "0" is selected for "Maximum gain", "Max.2/30s" or higher is not available in 30fps mode and
"Max.1/30s" or higher is not available in 60fps mode.
[Light control speed]
Adjust the light control speed.
If you move the slider in the "+" direction, the light control speed will increase.
If you move the slider in the "-" direction, the light control speed will decrease.
Click the [Reset] button to reset to the default setting.
•
Default: 31
Day & Night(IR)
[Day & Night(IR)]
Select switching between the color mode and the black & white mode from the following.
100 Operating Instructions
S11x2 S11x1 S15x1 S25x1 S22x1 S21x1