Panasonic WV-S2500 Series Operating Instructions Manual page 122

2 Settings
•
"Mic input interval (Camera to PC)" is unavailable when "AAC-LC" is selected for "Audio input encoding
format".
[Audio output volume (PC to Camera)]
Select a volume level on the camera to hear audio transmitted from the PC.
High/ Middle/ Low
•
Default: Middle
[Audio output interval (PC to Camera)]
Select an interval for audio transmission from the following.
160ms/ 320ms/ 640ms/ 1280ms
•
Default: 640ms
Note
•
When a shorter interval is selected, the delay time will be shorter. When a longer interval is selected,
audio interruption may be diminished even though the delay time will be longer. Select the interval
according to the network environment.
•
Audio may temporarily be interrupted and noise may be heard when multiple users are accessing the
camera concurrently. It may be possible to diminish the interruption or noise by setting a longer interval
for "Audio output interval (PC to Camera)".
•
Audio may sometimes not be heard depending on the network environment.
[Audio output duration]
Configure the maximum duration for each time audio is outputted.
1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 1h
•
Default: 5min
Note
•
Audio output stops when the specified time has passed. To turn the audio transmission function on,
click the Audio output button again.
[Audio output port (PC to Camera)]
Enter the transmission port number (the port number on the camera used to receive audio data transmitted
from the PC).
Available port number: 1024-50000 (Only even numbers are available.)
•
Default: 34004
Note
•
The transmission port number entered for "Audio output port (PC to Camera)" will be used only when
"Unicast port (MANUAL)" is selected for "Transmission type" (®page 93). When "Off" is selected for
"Stream transmission" (®page 89) or when "Unicast port (AUTO)" or "Multicast" is selected for
"Transmission type", it is not necessary to enter the transmission port number.
Live page
[Audio input encoding format]
Select the audio input encoding format to be used in the "Live" page from G.726, G.711, or AAC-LC.
•
Default: G.726
Note
•
G.711 is available only when the "Mic Input (To PC)" is selected for "Audio transmission mode".
•
G.726 is always applied for the audio transmission encoding format.
122 Operating Instructions
S11x2
S11x2 S11x1 S151x
S11x2
S11x1 S151x
S25x1 S22x1
S11x1 S151x S25x1
S25x1 S22x1 S21x1
:
S21x1
S22x1 S21x1
:
: