Panasonic WV-S2500 Series Operating Instructions Manual page 34

1 Operations
–
TRM1: Alarm by alarm input to Terminal 1
–
TRM2: Alarm by alarm input to Terminal 2
–
TRM3: Alarm by alarm input to Terminal 3
–
VMD: Alarm by VMD alarm
–
COM: Alarm by command alarm
–
AUD: Alarm by audio detection alarm
–
FTP: Logs saved from FTP periodic image transmission errors
•
[SD memory card]: Available capacity and the original capacity of the SD memory card will be
displayed.
•
(Delete) button: Click this button to delete the currently displayed log list.
IMPORTANT
•
If there are many recorded data files on the SD memory card, it may take time to delete all of
them. (For example, when the total size is 1 GB, it may take about 1 hour to delete the files.)
In this case, format the SD memory card. However, please note that formatting will delete all
of the files on the SD memory card.
•
In the process of the deletion, "Alarm" and "Manual/Schedule" cannot be operated.
•
Do not turn off the power of the camera until the deletion is complete. When the power of the
camera is turned off in the process of the deletion, some images may remain on the SD memory
card. In this case, click the
•
(Download) button: Click this button to download all logs of the selected log list onto the PC.
Note
•
The following settings may be required.
Open Internet Explorer, click [Tools] ® [Internet Options] ® [Security] ® [Trusted Sites] ®
[Sites]. Register the camera address on [Website] of the displayed trusted windows.
After registration, close the web browser, and then access the camera again.
•
Up to 50,000 logs will be downloaded to the SD memory card. When more than 50,000 logs
are filed, the older logs will be overwritten by the newer logs. In this case, the oldest log is the
first to be overwritten.
•
(Close) button: Click this button to close the log list window.
34 Operating Instructions
button on the same log list window used to delete the logs.