Panasonic WV-S2500 Series Operating Instructions Manual page 67

[Status reception port]
When selecting "Real time" for "Status update mode", designate a port number to which the status change
notification is to be sent.
•
Available port number: 1 - 65535
•
Default: 31004
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670
[Viewer software (nwcv4Ssetup.exe)] - [Automatic installation]
Determine whether or not to install the viewer software from this camera.
•
On: Installs the viewer software from the camera automatically.
•
Off: The viewer software cannot be installed from the camera.
•
Default: On
IMPORTANT
•
For PCs that do not have the viewer software "Network Camera View 4S" installed, JPEG images are
displayed. You cannot display images using H.265 (or H.264) or send/receive audio to/from the
camera. In order to display H.265 (or H.264) images or send/receive audio to/from the camera, you
must click "Viewer Software" on the "Live" page (®page 12) and then install the viewer software.
•
The number of the viewer software installations can be checked on the [Upgrade] tab of the
"Maintenance" page.
[Viewer software (nwcv4Ssetup.exe)] - [Smoother live video display on the browser
(buffering)]
Perform settings to display camera images on the viewer software.
•
On: Images are temporarily stored on the computer and are displayed smoother.
•
Off: Images are displayed in real-time and are not stored on the computer.
•
Default: On
[Viewer software (nwcv4Ssetup.exe)] - [Contrast enhancement (RGB:0 to 255)]
Select "On" or "Off" to determine whether or not to enhance the contrast of H.265 images or H.264 images on
the "Live" page.
If "On" is selected, the range of RGB signal on display is extended from 16-235 to 0-255.
When there is a bright part in an image, the intensity may be overexposed. Select a setting suitable to your
usage environment.
•
Default: Off
Note
•
This setting is only available when viewing images on the "Live" page with Internet Explorer.
•
Even if this setting is changed, transmitted image data and data saved on the SD memory card are not
changed.
[Audio out]
S15x1
Set the Audio/Monitor output format.
Audio/Monitor
•
Default: Audio
Note
•
When "Audio out" is set to "Audio", "Monitor out" cannot be selected.
•
When "Audio transmission mode" is set to anything other than "Off" or "Mic input", "Audio out" cannot
be set to "Monitor".
S25x1 S22x1 S21x1
2 Settings
Operating Instructions 67