Panasonic WV-S2500 Series Operating Instructions Manual page 98

2 Settings
Note
•
When the following are observed depending on the light condition, select "Off" for "Super
Dynamic(SD)".
–
When flickering appears or the color changes on the screen
–
When noise appears in the brighter area on the screen
Super Dynamic function
When there is wide variation between the illumination of light and dark areas of the location being monitored,
the camera adjusts the lens iris in accordance with the brighter areas. This causes loss of detail in darker areas.
Conversely, adjusting the lens brightness for the darker areas causes the brighter areas to become washed
out.
Super Dynamic digitally combines an image that is set up for a clear view of the brighter areas with an image
that is set up for a clear view of the darker areas, creating a final image that preserves overall detail.
A
[BLC/ HLC]
Select from the following. When "On" is selected for "Super Dynamic(SD)" or when "On" is selected for
"Intelligent Auto", this setting is not available.
•
Back light compensation (BLC): Activates the back light compensation (BLC) function.
•
High light compensation(HLC): Activates the high light compensation (HLC) function. The high light
compensation function limits the over exposure of subjects caused bright light (such as light from headlights
of cars) at night.
•
Off: Deactivates the back light compensation function and high light compensation function.
•
Default: Off
[BLC level]
Adjust the BLC level.
If you move the slider in the "+" direction, the effect of back light compensation will increase.
If you move the slider in the "-" direction, the effect of back light compensation will decrease.
98 Operating Instructions
C
B
A.
Subject in the dark
area is hard to notice...
B.
Subject in the bright
area is washed out...
C.
Creates a clearer
image by digitally
combining images