Monitoring The Basic And Standard Displays For The St 700 Standard Transmitter; Basic Display_St 700 Standard Transmitter; Standard Display_St 700 Standard Transmitter; Figure 20 - St 700 Standard Transmitter - Basic Display With Process Variable Format - Honeywell ST 700 User Manual

5.7 Monitoring the Basic and Standard Displays for the
ST 700 Standard Transmitter
This section describes the information shown on the operator screens of the Basic and Standard
Displays.

5.7.1 Basic Display_ST 700 Standard Transmitter -

Figure 20 illustrates the Basic Display format with Process Variable (PV).

The PV value is user-configurable. This field has 7 characters. The maximum allowable
numeric value is 9999999 or -999999. If fractional decimals are configured, the fractional
positions will be dropped, as required. If the PV value exceeds the above limits, it is divided
by 1000 and "K" is appended to the result, allowing a maximum value with multiplier of
999999K or -99999K.

Process Variable Tag is user-configurable from a HART Host. This field has 14 characters.

Engineering Units, this field is user-configurable. This field has 8 characters.
Figure 20 – ST 700 Standard Transmitter - Basic Display with Process Variable Format

5.7.2 Standard Display_ST 700 Standard Transmitter -


The PV value is user-configurable. This field has 6 characters. The maximum allowable
numeric value is 999999 or -999999.
o If fractional decimals are configured, the fractional positions will be dropped, as
required.
o If the PV value exceeds the above limits, it is divided by 1000 and "K" is appended
to the result, allowing a maximum value with multiplier of 99999K or -99999K.
Page 42
ST 700 SmartLine Pressure Transmitters User's Manual
Revision 8.0