Figure 53 – ST 700 Basic Transmitter - Flange Adapter Removal and Replacement
Refer to the instructions included with the kit for removal and replacement procedures.
12.7 Wiring an ST 700 Basic Transmitter
12.7.1 Overview
The ST 700 basic transmitter is designed to operate in a two-wire power/current loop with loop
resistance and power supply voltage within the operating range shown in Figure 54
Figure 54 – ST 700 Basic Transmitter - Operating Ranges
ST 700 SmartLine Pressure Transmitters User's Manual
Revision 8.0
Page 87