Introduction_St 700 Basic Transmitter; Overview; Features And Options; Table 28 - St 700 Basic Transmitter - Features And Options - Honeywell ST 700 User Manual

10. Introduction_ST 700 Basic Transmitter

10.1 Overview

This section is an introduction to the physical and functional characteristics Honeywell's family of
the ST 700 Basic SmartLine Pressure Transmitters.
If you are not sure which type of ST 700 you have, Standrad or Basic, please refer to
manual
If you have a ST 700 Standard Transmitter use Sections
If you have a ST 700 Basic Transmitter go straight to Section

10.2 Features and Options

The ST 700 Basic transmitter is available in a variety of models for measuring Differential Pressure
(DP), Gauge Pressure (GP), and Absolute Pressure (AP). Table 28 lists the protocols, human interface
(HMI), materials, approvals, and mounting bracket options for the ST 700.
Table 28 – ST 700 Basic Transmitter - Features and Options
Feature/Option
Communication Protocols
Human-Machine Interface (HMI)
Options (Standard Display/External
Two buttons)
Calibration
Approvals
See section 0 for details.
Mounting Brackets
Integration Tools
Revision 8.0
HART
Standard Display (HART



Single
FM, CSA, ATEX, IECEx, SAEx, INMETRO, NEPSI,
GOST
Angle/flat carbon steel/304 and 316 stainless steel,
Experion
The 2-button option is available for the Standard Display.
The External 2-buttons option is available in this model.This is used for
navigation of standard display or for setting zero, span and zero correct
where standard display is not connected.
ST 700 SmartLine Pressure Transmitters User's Manual
2 through 9.
10 through
Basic/Available Options

version 7

only):
Two-button programming (optional)
Standard display language: English only
Two-mode operations: PV display and Menu
Navigation
Section 1 of this
17.
Page 71