Communicating With The Transmitter; Sln 700 Transmitter Label; Figure 1-2: Sln 700 Transmitter Label Example - Honeywell SLN 700 User Manual

1.4 Communicating with the Transmitter

Level monitoring is possible through either the analog current (4-20 mA) or HART. It is
possible to configure a transmitter using HART
interface and display. For more information on HART commands, refer SLN700 NCR
HART Option Manual 34-SL-25-16.

1.5 SLN 700 Transmitter Label

The transmitter label is mounted on the side of the electronics housing
(see Figure
•
Model number
•
Physical configuration
•
Power supply voltage
•
Maximum working pressure rating
•
Certification, if ordered (IECEx and CSA)
Revision 2
1-2) and lists the following properties:

Figure 1-2: SLN 700 Transmitter label example

SLN 700 SmartLine NCR Level Transmitter User's Manual
©
protocol or using the four-button
Page 3