Delta 36-6022 Instruction Manual page 15

Place the sides of the support rod assembly (E & F) so they are outside of the pedal assembly (D) and the feet are
pointing down. See Figure 11 for correct position of the feet.
Align the hole in the support rod assembly with the hole in the pedal assembly. See Figure 10.
Secure each side of the support rod assembly using two M8 x 67 carriage bolts (bb), spacers (cc) and M8 lock nuts (dd).
See Figures 10 & 11.
NOTE: At any time, to aid in assembly, refer to front cover of this manual for completed saw.
ASSEMBLY
D
FIGURE 9
E F
+
D
FIGURE 10
15
UPPER
STAND
ASSEMBLY
SEE FIGURE
8
bb
cc
dd