High quality and feature loaded.
•
Magnetic motor starter with thermal
overload and no-voltage protection.
•
Full cabinet with motor cover
for sawdust containment.
•
Built-in storage for miter
gage, rip fence and blade
wrench.
•
Extra-large cast-iron table with
extension wings provides ample
support for large work.
•
Integral T-slot grooves prevent
miter gage from falling during wide
cut-off operations.
•
Convenient up-front blade raising and
tilting controls for safe, easy operation.
Model 36-755 10Ó Tilting Arbor Saw.
Includes basic machine with Jet-Lock
Micro-Set
®
rip fence; see-thru blade guard,
splitter and anti-kickback attachment; front
graduated guide bar, rear guide bar, miter
gage, 10Ó dia. saw blade, table insert, arbor
and motor pulleys, V-belt, (2) table extension
wings, motor cover; 2HP, 230V, single phase,
60 Hz., TEFC motor; motor starter and
instruction manual.
Model 36-751 10Ó Tilting Arbor Saw with 30Ó Unifence
Saw Guide. Same as Model 36-755 above less Jet-Lock
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
includes fence, carriage assembly, front guide bar, table
frame, legs and mounting hardware. Less table board.
Model 36-752 10Ó Tilting Arbor Saw with 52Ó Unifence
Saw Guide. Same as Model 36-755 above less Jet-Lock
Micro-Set
®
rip fence with front and rear guide bars and (1)
table extension wing, but with Unifence
includes fence, carriage assembly, front guide bar, table
frame, legs, shelf support brackets and mounting hardware.
Less table and shelf boards.
Motor ........................................... 2 HP, 230V, 60 Hz., single phase
Blade:
Diameter .................................................................... 10Ó (254 mm)
Arbor .............................................................................
Speed ............................................................................... 4000 rpm
Capacity:
Max. depth of cut 90° ................................................. 3
Max. depth of cut 45° ................................................. 2
Max. rip R of blade .................................................... 25Ó (635 mm)
Max. rip L of blade .................................................. 15
Max. rip R of blade w/30Ó Unifence Saw Guide ........ 30Ó (762 mm)
Max. rip R of blade w/52Ó Unifence Saw Guide ...... 52Ó (1321 mm)
Max. rip L of blade w/30Ó or
52Ó Unifence Saw Guide ....................................... 8
Table in front of saw blade at
max. cutting height .............................................. 12
Max. width of dado .....................................................
10" Tilting Arbor Saw
®
,
Model 36-755 10Ó Tilting Arbor Saw
®
®
,
®
Saw Guide which
®
®
,
®
Saw Guide which
5
⁄
Ó (16 mm)
8
1
⁄
Ó (79 mm)
8
1
Ó (54 mm)
⁄
8
1
⁄
Ó (394 mm)
2
3
⁄
Ó (222 mm)
4
1
⁄
Ó (311 mm)
4
13
⁄
Ó (21 mm)
16
5
Model 36-751 10Ó Tilting Arbor Saw
with 30Ó Unifence Saw Guide and
34-914 Accessory Table Board.
®
Model 36-752 10Ó Tilting Arbor Saw
with 52Ó Unifence Saw Guide
and 34-998 Accessory Table and
Shelf Boards.
1
Cuts stock 3
⁄
Ó thick; a full
8
1
2
⁄
Ó at 45° blade tilt. 2 HP
8
motor delivers plenty of power
for fast, efficient cutting.
Table:
Size w/extension wings .......................... 36Ó x 27Ó (914 x 686 mm)
Size w/ext. wing and 30Ó
Unifence Saw Guide ...................... 62
Size w/ext. wing and 52Ó
Unifence Saw Guide ...................... 78
Height ...................................................................... 34
Miter gage groove ........................................
Overall Dimensions:
Width ....................................................................... 45Ó (1143 mm)
Width w/30Ó Unifence Saw Guide ........................ 67
Width w/52Ó Unifence Saw Guide ........................... 83Ó (2108 mm)
Depth ......................................................................... 32Ó (813 mm)
Height ........................................................................ 39Ó (991 mm)
Weight: Model 36-755 ......................................... 288 Ibs. (131 kg)
Model 36-751 ......................................... 290 Ibs. (132 kg)
Model 36-752 ......................................... 293 Ibs. (133 kg)
Unique "table top located"
adjusting screws for accurate
setting of 45° and 90° positive
blade stops.
1
⁄
Ó x 27Ó (1588 x 686 mm)
2
1
⁄
Ó x 27Ó (1994 x 686 mm)
2
1
⁄
" (870 mm)
4
3
3
⁄
Ó x
⁄
Ó (10 x 19 mm)
8
4
1
⁄
Ó (1715 mm)
2
For accessories, see page 27