Kyocera KM-2530 Service Manual page 86

2DF
• If the printing system was installed
20. Reinstall the printing system into the shield
cover, fastening it into place with 2 screws.
21. Reattach the rear cover with 13 screws.
22. Adhere the certification labels to the rear
cover at the locations indicated in the
illustration (only 120 V Spac.).
1-3-64
Printing system
Screws
Figure 1-3-142
Figure 1-3-143
Certification
labels
Figure 1-3-144
Rear cover
Screws