Kyocera KM-2530 Service Manual page 27

Install the toner disposal tank.
1. Install the toner disposal tank in the copier.
2. Close the front cover.
Connect the power cord.
1. Connect the power cord to the connector on the
copier.*
*200-240 V specifications only.
2. Insert the power plug into the wall outlet.
Carry out initial developer setting (maintenance item U130).
1. Turn the main switch on and enter the maintenance mode by entering "10871087" using the numeric keys.
2. Enter "130" using the numeric keys and press the start key.
3. Press the start key to execute the maintenance item.
The drive stops within approximately 5 minutes.
4. Press the stop/clear key.
Load paper.
1. Load paper in the drawer.
Output an own-status report (maintenance item U000).
1. Enter "000" using the numeric keys and press the start key.
2. Select "MAINTENANCE" and press the start key to output a list of the current settings of the maintenance items.
3. Press the stop/clear key.
Exit maintenance mode.
1. Enter "001" using the numeric keys and press the start key.
The machine exits the maintenance mode.
Print out the user setting list.
1. Press the * key to enter default setting and press the [Print form] key. The counter report will be output.
Toner disposal tank
Figure 1-3-10
2DF
1-3-7