Kyocera KM-2530 Service Manual page 128

Maintenance
item No.
U246
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Setting the side registration cursor stop position
1. Select the desired cursor position. The selected item is displayed in reverse.
2. Change the setting using the cursor up/down keys.
Display
FRONT
REAR
END
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.
Left stapling
Upper side is longer. Lower side is longer.
Lower side is longer. Upper side is longer.
Description
Front side registration cursor stop position
Rear side registration cursor stop position
Trailing edge registration cursor stop position
Description
Right stapling Adjustment method
Proper
Decrease the preset
Increase the preset
value.
Setting range
-4 to +4
-4 to +4
-4 to +4
value.
Initial setting
0
0
0
2DF
1-4-39