Kyocera KM-2530 Service Manual page 139

2DF
Maintenance
item No.
U332 Setting the size conversion factor
Description
Sets the factor for converting each paper size into A4/11" × 8
1
8 / " size using the factor set in this maintenance item. Values set are displayed in the user simulation.
2
Purpose
To set the factor to convert the black ratio of each paper size for A4/11" × 8
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper size.
3. Change the setting using the cursor up/down keys.
The size conversion factor can be set separately for the copier mode (COPY), the printer mode (PRI) and
the fax mode (FAX) at the screen for setting the size conversion factor.
Metric models
Display
A3
B4
A4
B5
A5
B6
FOLIO
OTHER
Inch models
Display
11 × 17
8.5 × 14
8.5 × 11
5.5 × 8.5
OTHER
4. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item is displayed.
U341 Specific paper feed location setting for printing function
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the paper feed location for the printer. The selected item is displayed in reverse.
Display
FIRST
SECOND
THIRD
FOURTH
LCF
3. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item is displayed.
1-4-46
Description
Size conversion factor for A3
Size conversion factor for B4
Size conversion factor for A4
Size conversion factor for B5
Size conversion factor for A5
Size conversion factor for B6
Size conversion factor for folio
Size conversion factor for non-standard sizes 0.0 to 3.0
Description
Size conversion factor for 11" × 17"
Size conversion factor for 8.5" × 14"
Size conversion factor for 8.5" × 11"
Size conversion factor for 5.5" × 8.5"
Size conversion factor for non-standard sizes 0.0 to 3.0
Description
Upper drawer
Lower drawer
Optional upper drawer
Optional lower drawer
Optional large paper deck
Description
". The black ratio is converted for the A4/11" ×
1
/
2
Setting
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
Setting
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
0.0 to 3.0
1
/ " size.
2
Initial setting
COPY PRI FAX
2.0 2.0 2.0
1.5 1.5 1.5
1.0 1.0 1.0
0.7 0.7 0.7
0.5 0.5 0.5
0.4 0.4 0.4
0.3 0.3 0.3
1.0 1.0 1.0
Initial setting
COPY PRI FAX
2.0 2.0 2.0
1.5 1.5 1.5
1.0 1.0 1.0
0.7 0.7 0.7
0.5 0.5 0.5